Atomic modules bond on contact. Push them edge to edge and they work as one module of your own making: a rig. Sequencers, complex LFOs, multi-segment envelopes, generative machines, as wild as you like.
Clock
A clock in BPM or in Hz.
Sequencer
An arpeggiator or a sequencer. Can be clocked by a CLK.
Triggers
Trigger buttons. Can be sequenced by a SEQ.
Constant voltage
A fader that holds a voltage. Can be sequenced by a SEQ.
Curve
A function. Can be sequenced by a SEQ.
Attenuverter
A VCA: a four-quadrant multiplier with gain and offset. Can be sequenced by a SEQ, and can set the range of CVs and CRVs.
Quantizer
A quantizer. Can be sequenced by a SEQ, and can set the grid a CV moves on, from the keys of a scale to steps of its own spacing.
Mixer
A mixer. Can capture the outputs of other modules in the rig.
Polyphony
Merges channels into one poly cable. Can capture the outputs of other modules in the rig, or split a poly cable across them.
Rig browser
Saves the rig to its right as a file, with scenes, snapshots recalled by voltage.
Gap
A blank panel that splits a rig into subrigs.
Drop a SEQ.
Put five CVs on its left. Push them edge to edge and they bond; a strip, the bracket, appears along the top of all six. Each CV is now a step.
Put a QNT on the left of the CVs and light the keys of a scale. Every CV now lands on a lit key and shows its note.
Put an ATN anywhere on the left of the CVs, before the QNT or after it, and drag its gain to the octaves you want.
Put a CLK anywhere to the left of the SEQ.
Put a RIG at the far left and click SAVE. Everything to its right goes into a rig file that the RIG can open again.
A few of the rigs on the RIG's factory shelf.
